SWS Ships Alloy 718 Crossovers with BGT2 and DLP-T4 Premium Connections

On July 6, 2026, Jiangsu Service Petroleum Technology Co., Ltd. (SWS) shipped two Alloy 718 crossovers after machining a Baosteel BGT2 pin at one end and a Dalipal DLP-T4 pin at the other. The customer supplied the blanks, and SWS machined the threads to the supplied drawing.

Two Premium Connections on One Component

The order called for two double-pin crossovers, each 800 mm long. The production record lists a connection size of 3-1/2 in. × 9.52 mm. Although the ends shared the same nominal size, each had to mate with a different connection. The crossover therefore needed a BGT2 pin on one end and a DLP-T4 pin on the other.

SWS handled both thread types on the customer-supplied parts, completing four pin ends across the two components. This order shows how a customer can supply the specified alloy blanks and have both premium threads machined by one supplier.

Threading Support for Small Crossover Orders

BGT2 and DLP-T4 are listed on SWS’s respective Baosteel and Dalipal authorization certificates for this order period. For new enquiries, SWS reviews each end against the applicable licence scope and checks the component drawing and blank dimensions before confirming the machining scope.

If you need a crossover with two different premium connections, send us the drawing, connection designation and pin or box configuration for each end, material grade, and quantity. If you already have the blanks, include their dimensions so we can assess a threading-only quotation.